Body material: carbon fiber, aviation aluminum alloy, injection molded parts, etc.
Landing gear mounting position: under the fuselage
Mission module location: inside the airframe
Body material: carbon fiber, aviation aluminum alloy, injection molded parts, etc.
Landing gear mounting position: under the fuselage
Mission module location: inside the airframe
50KG
Maximum payload
15m/s
Never Exceed Speed
4000m
Maximum level flight altitude
0°
Arm mounting angle
Body material: carbon fiber, aviation aluminum alloy, injection molded parts, etc.
Landing gear mounting position: under the fuselage.
Mission module location: inside the airframe.
Structure weight:33500g (depending on custom strength).
Maximum take-off weight: 115 kg.
| Parameter | Specification |
| Model | H50-1 |
| Material | Carbon Fiber + Aviation Aluminum Alloy |
| Number of Rotors | 4-axis 8-propeller |
| Wheelbase | ≤1850mm (±20mm) |
| Unfolded Size | 1500×1500×1000mm (±20mm) |
| Folded Size | 1000×1000×1000mm (±20mm) |
| Empty Weight | ≤33.5KG (excluding battery) |
| Total Weight with Battery | ≤66KG (without any modification) |
| Maximum Payload | ≤50KG |
| Maximum Takeoff Weight | ≤115KG |
| Maximum Flight Speed | ≤15m/s |
| Maximum Ascent Speed | ≤5m/s |
| Maximum Descent Speed | ≤4m/s |
| Maximum Takeoff Altitude | 4000m |
| Endurance (No Load) | ≥69min |
| Endurance (50kg Load) | ≥27min |
| Positioning System | GPS+RTK (supports single Beidou mode) |
| Power System | High-Efficiency FOC |
| Propeller Size | 48-inch Folding Propeller |
| Power Battery | 14S 37000mAh×4 |
| Charger | Intelligent Super Fast Charging |
| Remote Control | 7-inch Industrial Touch Screen + Optical View Screen |
| Control Distance | 5-20KM (Ground-to-Air, Line-of-Sight) |
| Protection Level | IP54 |
| Max Wind Resistance | ≤Level 7 |
| Operating Temperature | -20℃ to 50℃ |
*
*
