Body material: carbon fiber, aviation aluminum alloy, injection molded parts, etc.
Landing gear mounting position: under the fuselage
Mission module location: inside the airframe
Body material: carbon fiber, aviation aluminum alloy, injection molded parts, etc.
Landing gear mounting position: under the fuselage
Mission module location: inside the airframe
10KG
Maximum payload
18m/s
Never Exceed Speed
3000m
Maximum level flight altitude
0°
Arm mounting angle
Body material: carbon fiber, aviation aluminum alloy, injection molded parts, etc.
Landing gear mounting position: under the fuselage.
Mission module location: inside the airframe.
Structure weight: 8800g (depending on custom strength).
Maximum take-off weight: 36 kg.
| Parameter | Specification |
| Model | H10-1 |
| Material | Carbon Fiber + Aviation Aluminum Alloy |
| Number of Rotors | 6 |
| Wheelbase | ≤1630mm (±20mm) |
| Unfolded Size | 1730×1510×600mm (±20mm) |
| Empty Weight | ≤8.8KG (excluding battery) |
| Maximum Payload | ≤10KG |
| Maximum Takeoff Weight | ≤36KG |
| Maximum Flight Speed | ≤18m/s |
| Maximum Ascent Speed | ≤5m/s |
| Maximum Descent Speed | ≤4m/s |
| Maximum Takeoff Altitude | 3000m |
| Endurance (No Load) | ≥80min |
| Endurance (10kg Load) | ≥40min |
| Positioning System | RTK+GPS |
| Power System | High-Efficiency FOC |
| Propeller Size | 30-inch Carbon Fiber (Straight Blade) |
| Power Battery | 12S 32000mAh×2 |
| Charger | Intelligent Super Fast Charging |
| Remote Control | 7" Integrated Display (1920×1080) |
| Remote Standby Time | 8-15 hours |
| Transmission Distance | 10km (Upgradable) |
| Max Wind Resistance | ≤Level 6 |
| Operating Temperature | -20℃ to 50℃ |
| Protection Level | IP54 |
*
*
